This weekend's challenge was the light over the kitchen sink.....
While shopping at a major national hardware store, her and I stopped and looked at the light fixtures. She had mentioned how much she really liked the Edison Bulbs and the fixtures for sale now that were designed to show off the bulb. Then she found one that she really liked and wanted and had made her mind up to come back when she had some extra cash and spend the $65 on it (pictured below). (Yes, I did offer to pay for it myself and was quickly struck down)
It just so happened that my grandmother had another one of these wall sconce candle holders in a box of things in storage that she didn't have use for and the deconstruction began. The glass bell was held in place with a screw and washer, which was easily removed to reveal (to my excitement) that the bottom of the glass was an open hole. We then cut the the metal bell that held the glass off at the stem. After rummaging around my grandpa's garage filled with random items and pieces of things that he may have found during his years working for West Virginia State Road or hunting in the middle of nowhere, I was able to collect the other bits and pieces I needed. An old porch light, some rusty washers, chain, and a light canopy kit that I happened to have in my car. (Yes, I travel around with crazy stuff in my car. You never know when a project may appear.)
Using a drill, I bored out a hole in the metal bell large enough for the threaded light fixture rod to pass through. I then screwed the lamp holder (the part the light bulb screws into) to back into the threaded rod, pulled the electrical wires through it and, placed a washer large enough not to pass though the hole of the glass bell and bolt right after it. I pushed the rod though the hole in the glass bell and placed a rubber washer and metal washer on it and bolted it down so then the lamp holder and rod were then securely in place. The next hour or so was simply spent stacking and unstacking different washers, bolts, lamp parts, etc. until I got the overall shape I desired and bolted it tightly together and finished it off with a chain holder loop bolt. I painted all the parts with copper leafing paint and after drying I added black acrylic paint to give it an aged, hammered copper look.
I attached the chain and wove the wires through it. My husband, a licensed electrician, then mounted the brace, ceiling canopy, and wired the light up. *Not only have I managed to give my grandmother the light fixture she wanted without spending a dollar (with the exception of $8 for the bulb) and make her super happy, but I think I really impressed my grandpa too.
No comments:
Post a Comment